Shamsi Solar Inverter UTL 1475 - 24V/50A Shamsi
UTL’s solar inverter is the most preferred solar inverter and leading in India. There is Shamsi solar inverter that is widely used in the home, offices, commercial, and industrial sectors. There are various models in Shamsi solar inverter (675VA/12V to 1475VA/24V) depends on it voltage.
Since power usage from the grid is secondary, grid power is only used when solar power is not present and the battery voltage level is reduced to a certain level. Grid power is also needed when solar power is reduced to a certain level and battery voltage is reduced to a certain level.
SHAMSI
Shamsi solar inverter has the advance features like PWM solar charge controller, most advanced LCD features, maximum preference to solar, capability of 100% panel rating, built in IT Mode etc.
Technical Specfication
Particulars Description Model 1475/50A 24V Nominal Grid Voltage 230V Battery Low Buzzer 10.8V Battery Low Cut 10.5V Battery High Cut 17V SPV Current 50A Grid - Battery Charging Voltage (Equalize) After 30 Days Grid - Battery Charging Current 10A/12.5A Grid Reconnect @ Battery Voltage 11.8V Output Phase 1 Phase, 3Wire Nominal Output Voltage 240V±5% Nominal Frequency 50Hz±1% Output Waveform Modified Sinewave Typical Efficiency ≥88% Protection Overload, Battery Low, Battery High, Output Short, Battery Reverse, Phase Reverse, Over Heat, SPV High. LED Indication System ON, (IT Mode, SMF/TUB, Boost Chg., Grid Chg.) Enable/Disable, Mains Status, Overload, Grid Chg., Inverter ON, Battery Status, SPV Chg., Fault Switches System ON, (IT Mode, SMF/TUB, Boost Chg., Grid Chg.) Enable/Disable Type of Charger PWM Efficiency >95% Input Voltage Range (Min - Max)Voc 17V-25V Maximum PV Power Recommended (315W/320W/325W) x 4 Operating Temperature 0-50°C Product Description
Special Features of Shamsi Solar Inverter
Maintain Battery Health for Longer Life
The Shamsi solar inverter feeds the battery installed to it at a constant boost charging current until its voltage reaches 14.58V and the float current, which maintains the voltage above 13.8V.
Modified Sine Wave Output
A sine wave output is also known as waveform for electronic equipment. The incoming AC line is a sine wave, thus electronic equipment expects to see this type of waveform. A sine wave is the most expensive output form for solar manufacturers to produce due to more complex circuitry and components.
Inbuilt IT Mode
IT loads which provide protections to IT instruments like computers, printers etc. In IT mode the change over time is very less so that there shouldn’t be any kind of breakdown in power supply.
Charging Multi
To increase the life of battery maintains the gravity and temperature and to increase the backup of battery we use the stages of charging and equalize automatically in a month.
Operate without Solar
Solar inverter of shamsi series can be operated with or without solar panel. The user can use solar inverter as a regular inverter without bothering about use of solar energy.
Easy Installation & Low Maintenance
Shamsi solar inveter is extremely easy to install and is available at a very low budget. It also helps in reducing the electricity costs.
Unique Features
- Maintain battery health for longer life.
- Modified sine wave output.
- Built-in IT mode.
- Easy installation & low maintenance.
- Best regulated output.
- Battery Charging with Multi stage (Bulk, Absorption & Float)
- Auto equalize in a month.
- Protections: RBP, RSPV, OVL, BL, OBC, SC, IHV & ILV.
- Inbuilt PWM Solar Charge Controller.
- LED Display for Operation & Fault